Alışveriş sepetiniz boş!
4 "e kadar olan gofretler için sol-gel ile kolay ve hızlı kaplama için tasarlanan vakumlu aynalara sahip kompakt sıkma kaplayıcı. Eğirme hızı, iki programlanabilir segment ile 500-8000 rpm'den değişkendir. Paket hemen kullanım için komple aksesuarlarla birlikte gelir.
Aluminum casting case to keep spinning stable
The liquid disk made of Polypropylene (PP) to resist most of the corrosive solutions
Drainage outlet and vacuum pump connector are on the back panel
One filter is included in the standard package. It is used to connect the coater for preventing wastewater flowing into the pump
One oil-less vacuum pump is included in the standard package,
Chamber Diameter: 145 mm
3 sets of PP anti-corrosive vacuum chucks with chuck o-ring come in different sizes (1'', 2'' and 4'')
1 piece of adhesive tape(6"W x 24"L) is included for coating irregularly shaped substrates (e.g. Place the irregular substrate on the adhesive tape, then the vacuum chuck will hold the tape by suction)
Mini suction cups are available for the small wafer with less 1" Dia. or substrate with regular ( 5x5, or 10x10mm) or irregular shape.
One 120L/min Oilless Vacuum Pump is included.
Vacuum grade rubber pipe is included for immediate use.
Digital control panel with TWO programmable segments for different spin times and speeds
Spinning speed: 500 - 8000 RPM
20mL syringe is used to contain the coating material
The syringe holder height can be adjusted and rotated freely along the support rod
Etiketler: MTI Spin Coater, Spin Coater, döner kaplama, Fotorezist kaplama, thin film kaplama, ince film kaplama