A basic, easy-to-use infusing syringe pump. It is the most cost-effective solution to begin working with microfluidics easily.

3 easy steps:

1. Set the diameter of the syringe
2. Adjust infusion rate
3. Start pump

Holds 1 Syringe from micro-liter sizes up to 60 mL. (140 mL partially filled)

Infusion rates from 0.73 µL/hr (1 mL syringe) to 1500 mL/hr (60 mL syringe)

Easy-to-use keypad interface:

Set the syringe diameter, pumping rate, press Start

Pumps continuously until you stop the pump

Syringe purge mode

Power failure mode allows the pump to continue pumping after a reset

Displays total volume dispensed in mL or µL units

The infusion rate can be changed while pumping

Selectable infusion rates units: mL/hr, µL/hr, mL/min, µL/min

Space Saving Chassis: Foot print size of only 5 3/4" x 8 3/4"

Won't take up unnecessary space on your laboratory or production bench

Remembers previous settings on power-up

Precise reproducible flow rates

Operates from included 12VDC power supply.