A basic, easy-to-use infusing syringe pump. It is the most cost-effective solution to begin working with microfluidics easily.

3 easy steps:

1. Set the diameter of the syringe
2. Adjust infusion rate
3. Start pump

Holds 1 Syringe from micro-liter sizes up to 60 mL (140 mL partially filled)

Infusion rates from 0.73 µL/hr (1 mL syringe) to 2100 mL/hr (60 mL syringe)

Easy-to-use keypad interface

One-click program upload from "Pumping Program Generator" spreadsheet

Space Saving Chassis: Foot print size of only 5 3/4" x 8 3/4"

Won't take up unnecessary space on your laboratory or production bench

Fully programmable; automation capable

Operates stand-alone or from a computer

Infusion and withdrawal

Set a single pumping rate and/or dispensing volume

Program up to 41 pumping phases that change pumping rates, set dispensing volumes, insert pauses, control and respond to external signals, sound the buzzer

Network, control, and monitor up to 100 pumps with one computer

Motor stall detection

Dispensing accuracy of +/-1%

High-pressure notes:

The NE-1000 produces about 15 lbs of linear force at top speed and about 35 lbs at slow speeds. 10 mL/hr is an example of slow speed. The pressure that can be generated is relative to the syringe size. On a 60 mL syringe, this would roughly produce about 30 psi.